Difference between revisions of "A Can we turn on the bulb? with Relay"
(Created page with "Category:Arduino Tutorials 680px ==Code== <syntaxhighlight> /* Can we turn on the bulb? with Relay Turns on an Relay on for one se...") |
|||
(One intermediate revision by one other user not shown) | |||
Line 1: | Line 1: | ||
+ | |||
[[Category:Arduino Tutorials]] | [[Category:Arduino Tutorials]] | ||
[[File:Arduino Interface Relay.JPG|680px]] | [[File:Arduino Interface Relay.JPG|680px]] |
Latest revision as of 16:02, 9 August 2015
Code
/* Can we turn on the bulb? with Relay Turns on an Relay on for one second, then off for one second, repeatedly. */ // Pin 13 has an LED connected on most Arduino boards. // give it a name: int Relay = 13; // the setup routine runs once when you press reset: void setup() { // initialize the digital pin as an output. pinMode(Relay, OUTPUT); } // the loop routine runs over and over again forever: void loop() { digitalWrite(Relay, HIGH); // turn the LED on (HIGH is the voltage level) delay(1000); // wait for a second digitalWrite(Relay, LOW); // turn the LED off by making the voltage LOW delay(1000); // wait for a second }