Difference between revisions of "1 -Blink a LED"
(Created page with "Category:Scratch for Arduino File:Aurduino Blink a LED.JPG ==''Button and LED''== '''digital 13 '''is the output LED for our board in this experiment '''w...") |
(No difference)
|
Revision as of 17:55, 8 January 2015
Button and LED
digital 13 is the output LED for our board in this experiment
wait 0.1 is the delay timing
Our experiment can be resume as :
when Button is clicked forever , on digital 13 for 0.1 sec then off digital 13 for 0.1 sec and its will keep repeating until stop is clicked