Difference between revisions of "Starter SST89E516RD USB Development board"

Line 13: Line 13:
 
{{Box|type=l_green_light|text = '''SST89E516RD MCU Features'''}}
 
{{Box|type=l_green_light|text = '''SST89E516RD MCU Features'''}}
 
{{Box|type=l_green_light|text = <br/>
 
{{Box|type=l_green_light|text = <br/>
 +
*1 KByte Internal RAM
 +
*Dual Block SuperFlash EEPROM– 64 KByte primary block +8 KByte secondary block
 +
*Support External Address Range up to 64KByte of Program and Data Memory
 +
*Three High-Current Drive Ports (16 mA each)
 +
*Three 16-bit Timers/Counters
 +
*Full-Duplex, Enhanced UART– Framing Error Detection– Automatic Address Recognition
 +
*Ten Interrupt Sources at 4 Priority Levels– Four External Interrupt Inputs
 +
*Programmable Watchdog Timer (WDT)
 +
*Programmable Counter Array (PCA)
 +
*Four 8-bit I/O Ports (32 I/O Pins) andOne 4-bit Port
 +
*Second DPTR register
 +
*Low EMI Mode (Inhibit ALE)
 +
*SPI Serial Interface
 +
*Standard 12 Clocks per cycle, the device has adoption to double the speed to 6 clocks per cycle.
 +
*TTL- and CMOS-Compatible Logic Levels
 +
*Brown-out Detection
 +
*Low Power Modes– Power-down Mode with External Interrupt Wake-up– Idle Mode
 +
}}
 +
 +
=Downloads=
 +
{{Box|type=l_green_light|text = <br/>
 +
*[http://xplorelabz.com/wiki/images/a/a7/8051_USB_Development_Board.pdf 8051 USB Development Board Schematic]
 +
*[http://exploreembedded.com/wiki/images/c/cb/EasyIAP_Rev_6.0.zip Programming Software: EasyIAP]
 
}}
 
}}

Revision as of 15:34, 25 August 2014


This is latest 8051 Starter Development board from Explore Embedded, the board uses SST89E512RD Microcontroller which is 100% compatible with P89V51RD2. The board has USB to Serial Convertor which can be used to program/flash the MCU; eliminates need for a programmer. It can used with laptops as well!

Features


  • SST89E516RD Microcontroller with bootloader (no programmer needed)
  • CP2102 USB to Serial Convertor on board
  • 16 x 2 LCD Interface
  • Switches x2
  • LEDs x2
  • All Ports pins as breakout.
  • High quality FR4 , wave soldered PCB.

SST89E516RD MCU Features


  • 1 KByte Internal RAM
  • Dual Block SuperFlash EEPROM– 64 KByte primary block +8 KByte secondary block
  • Support External Address Range up to 64KByte of Program and Data Memory
  • Three High-Current Drive Ports (16 mA each)
  • Three 16-bit Timers/Counters
  • Full-Duplex, Enhanced UART– Framing Error Detection– Automatic Address Recognition
  • Ten Interrupt Sources at 4 Priority Levels– Four External Interrupt Inputs
  • Programmable Watchdog Timer (WDT)
  • Programmable Counter Array (PCA)
  • Four 8-bit I/O Ports (32 I/O Pins) andOne 4-bit Port
  • Second DPTR register
  • Low EMI Mode (Inhibit ALE)
  • SPI Serial Interface
  • Standard 12 Clocks per cycle, the device has adoption to double the speed to 6 clocks per cycle.
  • TTL- and CMOS-Compatible Logic Levels
  • Brown-out Detection
  • Low Power Modes– Power-down Mode with External Interrupt Wake-up– Idle Mode

Downloads


Retrieved from "https://exploreembedded.com/wiki/index.php?title=Starter_SST89E516RD_USB_Development_board&oldid=2277"