Revision as of 10:35, 5 July 2014

Hack it like a arduino or build on it like an AVR. Integrated DTMF and Motor driver, will help you build you're next superbot with ease!

Features

Robotics board based on Atmega8 MCU.
Sensor shield to make line follower, light follower and obstacle avoidance robot.
Inbuilt DTMF decoder (MT8870) to make a Mobile controlled Robot
USB to UART convertor (CP2102) for communicating with computer, make a computer controlled Robot.
MCU with bootloader, no external programmer required.
Compatible with Arduino Software.

Assembling the Robot

@@ Line 1: / Line 1: @@
 [[Category:Robotic Kits]]
 {{Popup|type=l|text=
-Hack it like a arduino or build on it like an AVR. Integrated DTMF and Motor driver, will help you build you're next superbot at jaw dropping cost!
+Hack it like a arduino or build on it like an AVR. Integrated DTMF and Motor driver, will help you build you're next superbot with ease!
+}}
+{{Box|type=l_green_light|text='''''Features'''''}}
+{{Box|type=l_green_light|text=<br/>
+*Robotics board based on Atmega8 MCU.
+*Sensor shield to make '''line follower, light follower and obstacle avoidance robot.'''
+*Inbuilt DTMF decoder (MT8870) to make a '''Mobile controlled Robot'''
+*USB to UART convertor (CP2102) for communicating with computer, make a '''computer controlled Robot.'''
+*MCU with bootloader, '''no''' external programmer required.
+*Compatible with Arduino Software.
 }}
@@ Line 10: / Line 19: @@
 </gallery>
-{{Box|type=l_green_light|text=
-Combine it with a Xplore_Sense shield to build
-* Mobile Controlled
-* Line follower
-* Obstacle avoidance
-* Computer controlled
-* or Let it just follow the Light!
-}}
 =Assembling the Robot=
 ==Mounting the BO Motor with Clamps==