View source for Timers On Explore M3 ← Timers On Explore M3

[[Category:Explore M3 Bare Metal]]
In this tutorial we are going to discuss the Timer module of Explore M3.<br>
LPC1768 has four 32-bit timers, We will use Timer0 and Timer1 to generate a delay of 100ms and 500ms for blinking the LEDs. 
<br><br><br>

=Prerequisites=
Please check [[LPC1768: RTC Programming|this tutorial]] for detailed explanation on inbuilt Lpc1768 RTC module.<br>
If you are doing it for the first time, then check the below links to setup the project for generating the .bin file.
#[[LPC1768: Keil Project For Bin File|Keil4 Setup]] 
#[[Setting Up Keil5 For ExploreM3|Keil5 Setup]] 
#[[Setting Up ARM GCC For ExploreM3 LPC1768|ARM GCC Setup]]
#[[Setting Up ARM GCC And Eclipse For ExploreM3 LPC1768|Eclipse & ARM GCC Setup]]
<br><br>


=Hardware Connection=
LEDs are Connected to pin 13 and 14.<br><br><br>

=Code=
Below is the sample code to blink the LED's with 100ms and 500ms delay using timers.
<html>
<script src="https://gist.github.com/SaheblalBagwan/12a5b30fe40b2060d46711452e0f0961.js"></script>
</html>


=Demo=
Timer Delay measured using CRO. 
[[File:Lpc1768 Timers.png]]
<br><br>

[[File:00_Lpc1768_Timer.jpg]]