View source for Explore Mini Kit for AVR ← Explore Mini Kit for AVR

[[Category:AVR Development Boards]]
[[File:Mini AVR.jpg  |x500px]]
<gallery mode = "packed">
File:DSC00811.JPG 
File:DSC00805.JPG
File:DSC00803.JPG
File:DSC01051.JPG
</gallery>

Mini_AVR with USB is a small rapid prototyping board based on atmega 8 controller from AVR. Comes with inbuilt bootloader and hence eliminates use of external programmer. It can also be used with Arduino software. The board has additional pads for male connectors, with which the board can be fixed on a bread board!
The kit also has all the other components which help you do all the basic experiments. Later you could use the board in any of your projects. 

== Kit Contains==
{{Box|type=l_green_light|text=<br/>
*[[Mini_AVR_USB]] Development Board
*LCD 16 x 2
*Switches 12mm (x2)
*LEDs 5mm  x20
*LED RGB x2
*7 Segment 
*Buzzer 
*Relay 
*Pot 10K
*DC Motor 
*Light Dependent Resistor (LDR)
*Temperature Sensor (LM35) 
*Transistor BC547
*Resistors: 1K, 10K (10 each)
*USB Cable 1
*Jumper wires male to female x15
*Breadboard 
}}
=Downloads=
Visit the [[Mini_AVR_USB]] Development board page.