View source for Binary Semaphore 03: Worst Case Priority Inversion ← Binary Semaphore 03: Worst Case Priority Inversion

[[category: Free RTOS with Arduino]]
In this tutorial, we will see how to create and use binary semaphore.<br>
Later we will be looking into priority inversion using the LPT,MPT and HPT.<br><br>

==Teminologies==
#<b>LPT:</b> Low Priority Task
#<b>MPT:</b> Medium Priority Task
#<b>HPT:</b> High Priority Task


=Prerequisites=
Please check [[Semaphores|this tutorial]] for detailed explanation on Semaphores.<br> <br>

=API Details=
Below is the list of the API's used in this tutorial.

<b>1.xTaskCreate()</b>: This interface is used to create a new Task, if the task is successfully created then it returns pdPass(1) or else errCOULD_NOT_ALLOCATE_REQUIRED_MEMORY(-1). Check [http://www.freertos.org/a00125.html this link] for more details.<br>

<b>2.vTaskDelay()</b>: This function is used to delay/block the task for specified delay time(ticks). INCLUDE_vTaskDelay needs to be set to 1 in FreeRtosConfig.h file for using this function. Check [http://www.freertos.org/a00127.html this link] for more details.<br>

<b>3.vTaskDelete():</b>This function is used to delete as task. We need to pass the taskHandle of the task to be deleted.<br> To delete the own task we should pass NULL as parameter.<br> 
Please check [http://www.freertos.org/a00126.html this link] for details. <br>

<b>4.vSemaphoreCreateBinary():</b> This interface is used to create a binary semaphore. We need to pass a handle of type SemaphoreHandle_t to this function.<br> 
Please check [http://www.freertos.org/a00121.html this link] for details. <br>

<b>5.xSemaphoreTake():</b> This interface is used to acquire a binary semaphore. We need to pass a semaphore handle and the amount of time to wait for semaphore to become available.<br> 
Please check [http://www.freertos.org/a00122.html this link] for details. <br>

<b>6.xSemaphoreGive():</b> This interface is used to release a binary semaphore. We need to pass a semaphore handle to this function.<br> 
Please check [http://www.freertos.org/a00123.html this link] for details. <br>

<b>7.vSemaphoreDelete ():</b> This interface is used to delete a binary semaphore. We need to pass a semaphore handle to this function.<br> 
Please check [http://www.freertos.org/a00113.html#vSemaphoreDelete this link] for details. <br>



=Example=
In this example,  HPT waits for the LPT as it is holding the resource(semaphore). In between an MPT starts executing thereby blocking the LPT and HPT. This makes the HPT wait for MPT and LPT. 
<html><script src="https://gist.github.com/SaheblalBagwan/2e068861803630f0c404d48886c83775.js"></script></html>

[[File:BinarySemaphoreWorstCasePriorityInversion.png]]

#LPT starts running and acquires the semaphore.
#Now HPT is created and it preempts LPT and starts running. It makes the request to acquire the semaphore. Since the semaphore is already with LPT, HPT goes to blocked state.
#LPT starts executing again and creates an MPT tasks.
#MPT preempts the LPT and starts running. At this point, the HPT is starved because of LPT and MPT. MPT completes its job and deletes itself.
#LPT comes out of blocked state and releases the semaphore.
#Immediately the HPT comes out of the blocked state and starts executing. It releases the semaphore and runs for some time and deletes itself.
#Now control goes back to LPT which completes its job and deletes itself.
#Finally the scheduler is left out with the idle task and it keeps running.

In this scenario, the HPT task waits for LPT and MPT from 2-6 which is the extended priority inversion period.


Have an opinion, suggestion , question or feedback about the article let it out here!
{{DISQUS}}