View source for AVR USBasp v1.0 programmer ← AVR USBasp v1.0 programmer

[[Category:Programmers]]
[[File:Cart add.png|right|link=https://www.exploreembedded.com/product/AT89S%20Series%208051%20USBasp%20programmer]]
 
[[File:1-dsc04552.jpg|680x450px|Fig 1:AT89S Series 8051 Programmer]]

{{Box|type=l_green_light|text=<br/>
=Connecting to Target Hardware=
* Connect the 5X2 FRC cable to one end of the Programmer and other end to Development board or target device.

=Downloads=
[http://exploreembedded.com/wiki/images/4/47/AVR_usb_isp.pdf '''Schematic''']
==Setting up the XploreFlash Programmer==

Step 1: Xplore flash is based on various opensource software, it requires avrdude. Avrdude is part of WinAVR GCC complier. [http://sourceforge.net/projects/winavr/files/latest/download?source=files Download and install it.]<br />

Step 2: Download and install [http://www.fischl.de/usbasp/usbasp-windriver.2011-05-28.zip USB driver for the programmer.]<br/>
Step 3: Download and install [http://exploreembedded.com/wiki/images/e/ef/XploreFlash.zip  XploreFlash GUI]. (XploreFlash GUI is based on AVRDUDESS) 
<br/>


Step 4: Follow [[Using_XploreFlash|Step by step guide on using the programmer software XploreFlash]] program the micrcontroller. The GUI software will require [http://www.microsoft.com/en-gb/download/details.aspx?id=16614 .NET framework] 2.0 or later please download and install it.


=Troubleshoot=
==USBasp Driver not installed in device manager==
If the USBasp Programmer is not detected in '''Device Manager''' of windows computer, perform steps shown as shown on [[Install USBasp Drivers]] Page.

{{DISQUS}}
}}