View source for Uploading Hex File Using At89s52 ISP Programmer ← Uploading Hex File Using At89s52 ISP Programmer

[[Category:Starter 8051]]
In this tutorial, we will see how to use XploreFlash for flashing the hex files to AT89s52.<br>
First, we will see how to install the XploreFlash software along with UsbAsp drivers and then continue with flashing the controller.

=Installing UsbAsp Drivers=
Download the UsbAsp drivers from this link and follow the below steps.<br>
In case your are using <b>Windows7/Vista/Xp</b>, skip the first 4 steps and directly jump to step5.<br>

Windows 8 and above do not allow the installation of drivers that are not digitally signed. This needs to be disabled by follows the below steps.<br>
<b>STEP 1:</b> 
[[FILE:UsbAsp Setup Steps.png ]]  <br>

<b>STEP 2:</b>
[[FILE:UsbAsp Setup Steps 1.png]]  <br>

<b>STEP 3:</b>
[[FILE:UsbAsp Setup Steps 2.jpg]]  <br>

<b>STEP 4:</b>
[[FILE:UsbAsp Setup Steps 3.jpg]]  <br>

<b>STEP 5:</b>
[[FILE:UsbAsp Setup Steps 4.jpg]]  <br>

<b>STEP 6:</b> 
[[FILE:UsbAsp Setup Steps 5.jpg]]  <br>

<b>STEP 7:</b>
[[FILE:UsbAsp Setup Steps 6.jpg]]  <br>

<b>STEP 8:</b>
[[FILE:UsbAsp Setup Steps 7.PNG]]  <br>

<b>STEP 9:</b>
[[FILE:UsbAsp Setup Steps 8.png]]  <br>

<b>STEP 10:</b>
[[FILE:UsbAsp Setup Steps 9.PNG]]  <br>

<b>STEP 11:</b> 
[[FILE:UsbAsp Setup Steps 10.PNG]]  <br>

<b>STEP 12:</b>
[[FILE:UsbAsp Setup Steps 11.PNG]]  <br>

<b>STEP 13:</b>
[[FILE:UsbAsp Setup Steps 12.PNG]]  <br>

<b>STEP 14:</b>
[[FILE:UsbAsp Setup Steps 13.PNG]]  <br>

=Using XploreFlash(AVR Dudes)=

<b>STEP 1:</b> 
[[File:XploreFlash 01.PNG ]]  <br>

<b>STEP 2:</b>
[[File:XploreFlash 02.PNG]]  <br>

<b>STEP 3:</b>
[[File:XploreFlash 03.PNG]]  <br>

<b>STEP 4:</b>
[[File:XploreFlash 04.PNG]]  <br>