View source for LED Blinking with 8051 Starter Board ← LED Blinking with 8051 Starter Board

[[Category:Starter 8051]]
After setting up starter 8051 board, we will start with simple LED blinking experiment. On this board 4 LED's are connected to higher four bits of PORT 3.
We will write the code in Keil Compiler, to setting up Keil compiler for 8051 refer the [[8051_Keil_Setup|8051 Keil Setup]] tutorial. After generating the hex file refer the tutorial to [[Uploading_Hex_File_Using_nuvoTon|uploading hex file using nuvoTon]]. 

==Hookup==
[[File:8051 hookup.JPG|none]]

=Code=
<html>
<script src="https://gist.github.com/raghavendrahassy/ee9638f08b67bc6aee9337e6d43f5c29.js"></script>
</html>

== Demo ==

[[File:0Output 2un4ub.gif]]