View source for Programming nRF51822 with STlink on Windows ← Programming nRF51822 with STlink on Windows

[[User:Sandeep|Sandeep]] ([[User talk:Sandeep|talk]]) and
[[User:Vaibhav Katkar|Vaibhav Katkar]] ([[User talk:Vaibhav Katkar|talk]]) 17:43, 10 September 2015 (IST) 
----
Getting STlink v1 working with openOCD is a pain. The USB driver implementation has flaws. The PC picks different drivers for the same device depending on its mood! Initially I got it working on my computer and to check I asked Vaibhav to try on his computer. He too wanted to use it to debug the LPC1114 MCU that he is working on for a last few weeks. It did not work, even after following the exact same steps. So we debugged and found out what the issue was.

==Configuring Open OCD==

==Connecting STlink with nRF51822== 
===Reassigning WinUSB for stlink===

==Using Open OCD== 
===Open OCD as debugger===
===Open OCD as programmer/flasher===

==References==


[[File:k.png|600x600px]]

[[File:a.png|600x600px]]

[[File:b.png|600x600px]]

[[File:c.png|600x500px]]

[[File:e.png|600x600px]]

[[File:f.png|600x600px]]

[[File:g.png|600x600px]]

[[File:h.png|600x600px]]

[[File:i.png|600x600px]]