Explorers Mini Kit for AVR

The Mini Kit is intended for learning of 28 PIN AVR devices like the like the Atmega8/168/328 etc. The Kit as Mini AVR USB which is shipped with Atmega8. With this kit you can not only learn the internal details of the controller like the timer, UART, SPI, I2C but also learn interfacing external peripherals and can do a host of experiments. The board comes with a opti-boot bootloader, eliminating need for an external peripherals. It can also be used in other projects.
Mini Starter Kit for AVR 1024px copy.jpg

Kit Contains


  • Mini AVR USB Development Board
  • LCD 16 x 2
  • Switches 12mm (x2)
  • LEDs 5mm x20
  • LED RGB x2
  • 7 Segment
  • Buzzer
  • Relay
  • Pot 10K
  • DC Motor
  • Light Dependent Resistor (LDR)
  • Temperature Sensor (LM35)
  • Transistor BC547
  • Resistors: 1K, 10K (10 each)
  • USB Cable 1
  • Jumper wires male to female x15
  • Breadboard

Programming & Downloads

Check Mini AVR USB product page for setup and downloads.

Retrieved from "https://exploreembedded.com/wiki/index.php?title=Explorers_Mini_Kit_for_AVR&oldid=3652"