Line 1: Line 1:
 
[[category:ESP32 BareMetal]]
 
[[category:ESP32 BareMetal]]
''(Tutorial in the making...)'' <br>
+
 
 
Eclipse offers a very good development environment with numerous features, however setting it correctly is sometimes frustrating.  Once it is done, it make the workflow quite simple. So let's set it up and see how it goes!
 
Eclipse offers a very good development environment with numerous features, however setting it correctly is sometimes frustrating.  Once it is done, it make the workflow quite simple. So let's set it up and see how it goes!
  
Line 119: Line 119:
  
 
=References=
 
=References=
 +
* ESP-IDF documentation.
 +
*
 +
 +
{{Disqus}}

Revision as of 17:00, 23 December 2016


Eclipse offers a very good development environment with numerous features, however setting it correctly is sometimes frustrating. Once it is done, it make the workflow quite simple. So let's set it up and see how it goes!

The first thing that needs to be done is to set-up ESP-IDF and ensure that all the dependencies are taken care of. Check the detailed tutorial on setting up ESP-IDF to get that done.

The ESP-IDF is setup in such a way that you can develop your application without modifying the ESP-IDF files. The application can reside in a completely separate directory from the ESP-IDF files. This allows the ESP-IDF core files to be updated independently of the application. We will be configuring the same 01_hello_world example from the above tutorial.

Ensure that the tool-chain works from command line, before proceeding with this tutorial. In fact this tutorial uses the makefile setup from the previous tutorial to configure the tool-chain.

Download and Install Eclipse C/C++ IDE

To get started download the latest eclipse IDE for C/C++

http://www.eclipse.org/downloads/packages/eclipse-ide-cc-developers-includes-incubating-components/indigosr2

Create a New Project

All the images below have steps marked with numbers, please perform them in a series. To start with

  1. Select the project type as Empty Project
  2. Toolchains as Cross GCC
  3. Uncheck Use Default Location
  4. Enter the project Name as 01_hello_world

2 make file proj esp32.JPG

Setup Environment Variables

These variables are setup to tell eclipse where the tool-chain and the ESP-IDF core is located.

  1. Right Click on the Project Name.
  2. Select Properties.


3 proj properties.jpg

To add the environment variables:

  1. Expand C/C++ Build and click on Environment
  2. Click on the Add Button as shown below. Also notice that the IDE picks up some variable from the make file


4 env variables.JPG

Add the 3 variables as shown in the table below:

Variable Value Description
V 1 Turns ON the verbose. The console shows a tons of messages that the build process outputs.
You may turn it off later. It will be handy for troubleshooting.
IDF_PATH F:/esp32_bm/esp-idf This is path on my computer, put the path where you've downloaded the ESP-IDF
PATH C:\msys32\usr\bin;C:\msys32\mingw32\bin;C:\msys32\opt\xtensa-esp32-elf\bin Delete the existing value and replace it with this value

5 update env variables.JPG
6 path variables.JPG

Setup Build Variables

7 build cmd.JPG

  1. Click on C/C++ General
  2. Then Click on Preprocessor Include Paths
  3. Now tick the CDT Cross GCC Built-in Compiler Settings
  4. Add the value xtensa-esp32-elf-gcc ${FLAGS} -E -P -v -dD "${INPUTS}

9 compiler settings.JPG

We do similar step for build parser output like so:

  1. Click on C/C++ General
  2. Then Click on Preprocessor Include Paths
  3. Now tick the CDT GCC Build Output Parser
  4. Add the value xtensa-esp32-elf-(g?cc)|([gc]\+\+)|(clang)

10 build settings.JPG

Build/Compile the Project

Add finally we right click on the project and select Build Project

11 build proj.JPG

If everything we did has gone well so far, you'll see success. I messed up several times first to get it working and then while re-doing to capture the steps.
12 build sucess.JPG
Wait, do do you see some yellow exclamations there! These are files and folders eclipse is not able to find. So let's resolve these dependencies in the next step.

Resolving Dependencies

  • Click on C/C++ General this time, select Paths and Symbols, under the includes tab click on Add..

13 add dependency paths.JPG

Now add the following paths one by one. You may include more of these if you're project uses more ESP-IDF components. In the next tutorial I will try and cover the structure of the ESP-IDF and a simple example.

${IDF_PATH}/components/esp32/include
${IDF_PATH}/components/newlib/include
${IDF_PATH}/components/freertos/include
${IDF_PATH}/components/nvs_flash/include
${IDF_PATH}/components/driver/include
${IDF_PATH}/components/log/include

14 add dependency paths.JPG Okay, now check the exclamations, they are gone!

Configure targets

Are we done yet? NO, no hardware setup is done unless we program/flash the target. So let us configure two targets. Once to make all and other to flash.

Right Click on the Project, click on Build Targets and select Create..


15 targets.JPG

Finally its time to Flash the target. Ensure that the board is connected, and the correct com port is chosen from the menu 16 target flash.JPG

17 flash success.JPG

References

  • ESP-IDF documentation.

Template:Disqus