GSM SIM 900A USB shield is a handy solution for your GSM/GPRS interface needs. You may connect it to a Laptop/Desktop computer with USB or RS232 connection. Also there is a TTL breakout for directly connecting it to microcontrollers like AVR, Arduino, PIC, ARM etc.

DSC01413.JPG



Specifications: GSM SIM900A USB SHIELD


  • GSM/GPRS Module: SIMCOM SIM900A
  • On board Interfaces
    • USB (usb to serial using CP2102)
    • RS232 with MAX232
    • TTL pin breakout (RXD,TXD,GND)


SIM 900A GSM GPRS Module feature


General features
•Dual-Band 900/ 1800 MHz
•GPRS multi-slot class 10/8
•GPRS mobile station class B
•Compliant to GSM phase 2/2+
– Class 4 (2 W @900 MHz)
– Class 1 (1 W @ 1800MHz)
•SAIC (Single Antenna Interference Cancellation) support
•Dimensions: 24* 24 * 3 mm
•Weight: 3.4g
•Control via AT commands (GSM 07.07 ,07.05 and SIMCOM enhanced AT Commands)
•SIM application toolkit
•Supply voltage range : 3.2 ... 4.8V
•Low power consumption: 1.0mA(sleep mode&BS -PA-MFRMS=9 )
•Operation temperature: -40°C to +85 °C


Downloads


USB Driver

  • To connect GSM Modem with computer USB driver is required.

Windows USB to UART Drivers for CP2102

GUI for windows

  • Xplore GSM is a Windows GUI and command line software that can be used to test and evaluate the GSM USB Shield.

Datasheets

  • AT Commands SIM900 (english, basic commands for text messages, voice calls will be compatible with SIM900A)
  • AT Commands SIM900A (English and Chinese)
  • Code Examples and other software will be uploaded soon!
Purchase Online from our main site






For feedback, technical support and suggestions about this product, please comment below.