In this tutorial, we will see how to create and use binary semaphore.
Later we will be looking into priority inversion using the LPT,MPT and HPT.

Teminologies

  1. LPT: Low Priority Task
  2. MPT: Medium Priority Task
  3. HPT: High Priority Task


Prerequisites

Please check this tutorial for detailed explanation on Semaphores.

API Details

Below is the list of the API's used in this tutorial.

1.xTaskCreate(): This interface is used to create a new Task, if the task is successfully created then it returns pdPass(1) or else errCOULD_NOT_ALLOCATE_REQUIRED_MEMORY(-1). Check this link for more details.

2.vTaskDelay(): This function is used to delay/block the task for specified delay time(ticks). INCLUDE_vTaskDelay needs to be set to 1 in FreeRtosConfig.h file for using this function. Check this link for more details.

3.vTaskDelete():This function is used to delete as task. We need to pass the taskHandle of the task to be deleted.
To delete the own task we should pass NULL as parameter.
Please check this link for details.

4.vSemaphoreCreateBinary(): This interface is used to create a binary semaphore. We need to pass a handle of type SemaphoreHandle_t to this function.
Please check this link for details.

5.xSemaphoreTake(): This interface is used to acquire a binary semaphore. We need to pass a semaphore handle and the amount of time to wait for semaphore to become available.
Please check this link for details.

6.xSemaphoreGive(): This interface is used to release a binary semaphore. We need to pass a semaphore handle to this function.
Please check this link for details.

7.vSemaphoreDelete (): This interface is used to delete a binary semaphore. We need to pass a semaphore handle to this function.
Please check this link for details.


Example

In this example, we will be creating an LPT. LPT will acquire a semaphore and creates an HPT. HPT will preempt LPT as starts running. HPT tries to acquire a semaphore used by LPT and goes to blocked state resulting in priority inversion. Now LPT starts running and releases the semaphore and immediately HPT comes out of block state and starts running.

BinarySemaphorePriorityInversion.png

Here an HPT tasks waits for the LPT tasks as it is holding the resource(semaphore).

  1. LPT starts running and acquires the semaphore.
  2. Now HPT is created and it preempts LPT and starts running. It makes the request to acquire the semaphore. Since the semaphore is already with LPT, HPT goes to blocked state.
  3. LPT starts executing again and releases the semaphore.
  4. Immediately the HPT comes out of the blocked state and starts executing.
  5. It releases the semaphore and runs for some time and deletes itself.
  6. Now control goes back to LPT which completes its job and deletes itself.
  7. Finally the scheduler is left out with the idle task and it keeps running.

In this scenario, the HPT task waits for LPT from 2-4 which is the priority inversion period.


Have an opinion, suggestion , question or feedback about the article let it out here!