Line 6: Line 6:
  
 
With AVR Micro-controllers, you can configure interrupts on various sources such as:
 
With AVR Micro-controllers, you can configure interrupts on various sources such as:
 +
 
* Port Pins : INT0, INT1 and INT2
 
* Port Pins : INT0, INT1 and INT2
 
* Timers
 
* Timers

Revision as of 12:54, 19 March 2016

Interrupts, are perhaps one of the most important pieces that you need to understand for completing most of your micro-controller projects. Interrupts allow micro-controllers to continue doing their main job and provide mechanism to handle all other tasks which need the controller attention. Before we go ahead with the examples here, are a few situations where you may want to use these:

  • Let's say you have a device like GSM interfaced to your Micro-controller using UART or other serial interface. You simple do not know when you'll receive a new text message or a call. One way to handle this is continuously monitor for the even to occur. The other way is to configure a serial interrupt. Yes, you guessed it right, this is a Software Interrupt indeed.
  • Now let's say you're building a music player. The main task of the processor is to read and play back the audio file. However the player should be able to play/pause/forward/rewind. And this could happen any time. How about connecting the switches to hardware interrupt pins? The processor will be notified any time the events happen.

With AVR Micro-controllers, you can configure interrupts on various sources such as:

  • Port Pins : INT0, INT1 and INT2
  • Timers
  • UART
  • SPI
  • ADC
  • EEPROM
  • Analog Comparator
  • TWI or I2C

The vector table below shows Schematic

Schematic AVR Interupt.JPG