Line 4: Line 4:
 
<syntaxhighlight>
 
<syntaxhighlight>
 
/*
 
/*
  Melody
+
Make some noise with buzzer
 
   
 
   
 
  Plays a melody  
 
  Plays a melody  
 
   
 
   
 
  circuit:
 
  circuit:
  * Buzzer on digital pin 8
+
  *Buzzer on digital pin 8
 
   
 
   
 +
*/
 
  #include "pitches.h"
 
  #include "pitches.h"
 
// notes in the melody:
 
// notes in the melody:
Line 37: Line 38:
 
   // no need to repeat the melody.
 
   // no need to repeat the melody.
 
}
 
}
 +
  
 
</syntaxhighlight>
 
</syntaxhighlight>

Latest revision as of 16:42, 15 September 2014

Arduino Interface buzzer.JPG

Code

/*
 Make some noise with buzzer
 
 Plays a melody 
 
 circuit:
 *Buzzer on digital pin 8
 
 */
 #include "pitches.h"
// notes in the melody:
int melody[] = {
  NOTE_C4, NOTE_G3,NOTE_G3, NOTE_A3, NOTE_G3,0, NOTE_B3, NOTE_C4};
// note durations: 4 = quarter note, 8 = eighth note, etc.:
int noteDurations[] = {
  4, 8, 8, 4,4,4,4,4 };
void setup() {
  // iterate over the notes of the melody:
  for (int thisNote = 0; thisNote < 8; thisNote++) {
    // to calculate the note duration, take one second 
    // divided by the note type.
    //e.g. quarter note = 1000 / 4, eighth note = 1000/8, etc.
    int noteDuration = 1000/noteDurations[thisNote];
    tone(8, melody[thisNote],noteDuration);
    // to distinguish the notes, set a minimum time between them.
    // the note's duration + 30% seems to work well:
    int pauseBetweenNotes = noteDuration * 1.30;
    delay(pauseBetweenNotes);
    // stop the tone playing:
    noTone(8);
  }
}
void loop() {
  // no need to repeat the melody.
}