oneMicro ATmega128
![](https://www.exploreembedded.com/blog/wp-content/uploads/img-collections/onemicro128/dsc_9052-copy.jpg)
oneMicro is evolution of various experiments with breakout boards for Microcontrollers that we have been developing for quite some time. oneMicro is series of simple, programmable, breadboard friendly and bare-minimum breakout boards for majority of your favorite microcontrollers. oneMicro ATmega128 is breakout the popular Atmel Atmega128 chip. The board has CP2102 usb to serial convertor and comes with pre-programmed bootloader. This allows programming of the board with any external hardware.
Features :
128Kbytes of In-System Self-programmable Flash program memory
- 4Kbytes EEPROM
- 4Kbytes Internal SRAM
- Two 8-bit Timer/Counters with Separate Prescalers and Compare Modes
- Two Expanded 16-bit Timer/Counters with Separate Prescaler, Compare Mode and Capture Mode
- Real Time Counter with Separate Oscillator
- Two 8-bit PWM Channels
- 6 PWM Channels with Programmable Resolution from 2 to 16 Bits
- Output Compare Modulator – 8-channel
- 8 Channel, 10-bit ADC
- Byte-oriented Two-wire Serial Interface(I2C)
- Dual Programmable Serial USARTs
- Master/Slave SPI Serial Interface
- Programmable Watchdog Timer
- Pre-programmed bootloader
- 16MHz on board Crystal Oscillator
- On board USB to Serial convertor
- Fits on Breadboard
- Dimensions : 25mm X 20mm X 63mm ( L X W X H)
Downloads :
Tutorials
OneMicro ATmega128
We are build this stuff, check back again soon!
We are build this stuff, check back again soon!