Explore M3 : Arduino and Beyond with ARM Cortex M3

Explore M3 is a feature rich ARM Cortex M3 development board. It can help you prototype ideas faster with Arduino and take them beyond, with bare metal programming, RTOS support and lower power modes if need be. All the source-code and hardware design files are open-source including the on board boot-loader. This makes it easy in using the board/chip in your custom designs.

Hardware Features

Explore M3 uses the built-in USB 2.0 interface for programming as well as serial communication. It does not use any other additional chip. Hence if you want to use the board/chip directly into your project it will be very cost-effective. In addition to that the board has several very useful features:

  • Processor: LPC1768 ARM Cortex M3
  • Speed: 100MHz
  • Flash: 512KB
  • RAM : 64KB
  • GPIOs x 38
  • USB 2.0 full-speed device/Host/OTG controller
  • Hardware UARTs x 4, Virtual COM Port x 1
  • CAN x 2
  • SPI x 2
  • I2C x 2
  • PWM x 6
  • ADC x 5
  • DAC
  • Interrupt Pins x 2
  • I2S Audio
  • Breadboard Friendly .1 inch headers
  • Size: 25mm x 55mm
  • JTAG/SWD Debug connector



We are build this stuff, check back again soon!
We are build this stuff, check back again soon!