ARM LPC1768 Development Kit For Arduino
oneMicro is the evolution of various experiments with breakout boards for Microcontrollers that we have been developing for quite some time. It is a series of simple, programmable, breadboard friendly and bare-minimum breakout boards for the majority of your favorite microcontrollers.
ARM LPC1768 Development Kit For Arduino is a development kit for ARM. Board comes with preloaded bootloader hence you don’t need any external programmers . It has numerous on-board peripherals to interface them with the main controller. All the peripherals connections are broken out. A unique feature of the kit is that, oneMicro base board supports various 8 bit, 16 bit and 32 bit microcontroller breakout boards.
ARM LPC1768 Development Kit For Arduino is a feature rich ARM Cortex M3 development board with lots of onboard peripherals. It can help you prototype ideas faster with Arduino and take them beyond, with bare metal programming, RTOS support and lower power modes if need be. All the source-code and hardware design files are open-source including the on board boot-loader. This makes it easy in using the board/chip in your custom designs.
Hardware Features
Explore M3 uses the built-in USB 2.0 interface for programming as well as serial communication. It does not use any other additional chip. Hence if you want to use the board/chip directly into your project it will be very cost-effective. In addition to that the board has several very useful features:
- Processor: LPC1768 ARM Cortex M3
- Speed: 100MHz
- Flash: 512KB
- RAM : 64KB
- GPIOs x 38
- USB 2.0 full-speed device/Host/OTG controller
- Hardware UARTs x 4, Virtual COM Port x 1
- CAN x 2
- SPI x 2
- I2C x 2
- PWM x 6
- ADC x 5
- DAC
- Interrupt Pins x 2
- I2S Audio
- Breadboard Friendly .1 inch headers
- Size: 25mm x 55mm
- JTAG/SWD Debug connector
Resources:
Schematic
Design Files